Top Common Wall Hanging Myths Busted & Reviewed

Top Common Wall Hanging Myths Busted & Reviewed

Decorating your home can be a fun experience, especially if you’re into DIY projects. Hanging a mirror, creating a photo collage on your wall, and finally getting that shelf up are all common wall hanging DIY projects.

But before you get out the hammer and nails, you might be wondering is there any truth to some common wall hanging myths?

Whether its nail versus screws or brick versus drywall, there is a myth around every wall hanging venture. So, let’s jump right in and see if any of these myths have some truth to them or are busted.

Wall Hanging Myth #1: You Can’t Mount Stuff onto Tile Walls

In truth, you can mount plenty of things to your tile walls. There are, however, some points you’ll need to consider before you start hanging items on your tile walls. If the item you are hanging is lightweight, then you’ll only need to use one or more diamond tip screws. These screws are sharp enough to pierce through the tile and drywall.

The only drawback to using screws is your tiles will have a hole in them, so you’ll want to measure a few times before drilling.

If the item you are hanging is heavy, then there will be a few extra steps you’ll need to take. You’ll need to use another type of screw known as anchors. These screws are tougher than the diamond tip screws and will grip into the drywall behind the tile.

If you’re re-tiling and are intending to hang things afterward, then you’ll want to have the wall built with a couple of sheets of plywood, a layer of hardy board, and then tile on top. Doing this will help the wall bear any of the heavier items you intend to hang.

But if you’re hoping to avoid drilling holes into your tile wall, then you can use some adhesive options that are also waterproof. But these adhesives can’t handle weights that are heavier than 20 pounds.

You can see the full options at

Wall Hanging Myth #2: Drywall is Stronger than Plaster Walls

While many modern homes are built with drywall, it doesn’t necessarily mean this material is stronger. In truth, plaster walls are a lot tougher than drywall, and the same goes for walls made of lath. Lath and plaster are very tough materials and will require you to first use a nail to tap into the wall and then a drywall screw to hang things.

Another feature of plaster walls is they can vary in toughness. Some plaster walls are very tough while others may be brittle and easily fall apart. You’ll need to work slowly and carefully when hanging anything on this type of wall.

If you’re unsure about how anchored the screw is, then you can gently tug on the screw. If the screw feels loose then you’ll need to redo the fastening. If it feels solid, then you’ve fastened the screw into the wall correctly.

Wall Hanging Myth #3: It’s a Bad Idea to Hang Things on a Brick Wall

A brick wall is tough, and many don’t believe you can hang anything on these walls much less drill into them. Well, the truth is you can hang things on brick walls without any major issues. You’ll need a good drill and some cement screws to break through the brick.

The only downside to drilling into brick walls is it’s a lot harder to re-finish the wall once everything is said and done.

Wall Hanging Myth #4: You Always Have to Find the Stud to Hang Things

A common misconception is that to hang something properly you need a stud. In reality, you don’t always need wall studs to hang things on the wall. You can use a variety of other wall hanging methods to hang items on the wall. You can use drywall screws, press-in hooks, drywall hooks, hook-and-loop tape, and hanging strips to hang medium to lightweight items.

If you’re intent on hanging a TV or shelf on the wall, however, you will need to find a stud.

Wall Hanging Myth #5: You Can’t Hang Objects that Weight More than 200 Pounds

In most cases, people tend to only hang lightweight items such as pictures and curtains. Many people don’t believe it is possible to secure something heavy to a wall without the wall caving. In truth, you can hang many heavy objects to a wall so long as you use the studs behind the drywall.

But if your wall is made of crumbling drywall or old plaster, you may need to redo the wall before mounting anything on it.

Wall Hanging Myth #6: Screws are Better than Nails

When it comes to hanging things, people assume that screws are the best because they are threaded and create a stronger grip with each turn. Well, the truth of the matter is you can use both perfectly fine. Screws are ideal for heavy objects and walls that are impossible to nail into.
Nails, on the other hand, can be useful for hanging lightweight frames.

If you do use nails, make sure you hammer the nail in at a 30-degree angle with the tip pointing down. Doing this will ensure the nail goes in deep enough to hold the item you intend on hanging. Nails are also useful in cases where screws could do more damage than good.

Wall Hanging Myth #7: You Always Have to Use a Stud Finder When Hanging Things

While a stud finder is a very useful tool, the truth is, you don’t need them to hang things in your home. You can measure from the corner of your wall in 16 to 24-inch increments and still find a stud. You can use a tapping method with a rubber mallet and listen for the studs. There are many methods and techniques you can use to find a stud without a stud finder.

But if you’re worried about hitting a pipe, wire, or the air ducts in your  home, then a stud finder would be the best thing to have before you begin drilling holes in your walls.

Final Thoughts

Whether you need to hang a mirror on a brick wall or you simply don’t have any screws to spare, don’t let these myths stop you from having the home décor of your dreams. After all, myths are just myths and some myths are only partly true for a few cases. With all of this in mind, we hope this guide on busted wall hanging myths help you find the lighter side to DIY wall hanging projects and more.