Once you’ve made an investment in a bathroom remodelling project it’s imperative that you keep the entire area sanitised and safe for all of your family members to use. Having a whirlpool tub is a luxury that can offer you a plethora of health benefits as well as a level of personal relaxation and satisfaction that is unsurpassed, but keeping the jets and other areas clean is of the utmost importance. Let’s review some tips for keeping your whirlpool tub clean, spotless, sanitised, and ready for the next family member to enjoy.
- All whirlpool baths have a manual that contains some helpful information in the maintenance and operating procedures for your specific model. This booklet will inform you about which cleaning products to use, which ones should be avoided, and which ones will deep clean the jets that you have inside your tub. Always store your owner’s manual in a safe place so that you can access it when it’s necessary; you can also attach receipts that document when you made the purchase.
- The first thing that you’ll want to do is to close the air controls for each individual jet so that no air is inducted into the opening. Consult the owner’s manual if you have questions about this step; if you cannot find your manual, ask your supplier if the cleaning and maintenance instructions can be found online.
- Run water into your whirlpool tub until it’s at least two or three inches above all of the jets; before you add any cleaning solution, you may want to run the jets for just a few seconds to determine how much dirt and grime has collected inside the jet areas.
- Next, add the recommended cleaner as instructed by the manufacturer or combine a dishwasher detergent that doesn’t produce many suds with about half a cup of bleach. For a non-stringent approach you may want to substitute white vinegar which will give you the same results in a more environmentally-friendly process.
- You will then want to keep the jets running for about fifteen minutes, drain the tub, and then repeat the entire process for about ten minutes. This should give the whirlpool jets a thorough cleaning that removes all dirt, scum, and grime from their surface.
- Wipe down the entire surface of the whirlpool to clean all of the crevices that can trap dirt and bacteria. Be sure to use a sponge or soft cloth so that you won’t damage the surface of your tub with any rubbing or scratching movements.
If you have questions about how often to clean your tub, you may want to visit http://www.jtspas.co.uk where you can find a wealth of knowledge about whirlpools and the proper care of them. The experts at this site can also advise you about how often to clean your tub, what products to use, and how to effectively control bacteria in the water lines that are always moist.
Taking good care of your whirlpool ensures you of a safe and sanitary bathing area and also helps to protect the investment that you have made in upgrading your bathroom area.